General for sale Bundaberg ads Bundaberg, General for sale classifieds Bundaberg, General for sale free ads Bundaberg, ads for sale Bundaberg, ads to buy Bundaberg, FREEADSAustralia Page number 2-1

It is fabricated by asbestos threads impregnated with dry graphite, and the outermost is coated with 100% graphite. It is often applied for high temperatures and pressures and used in pumps and valves for oils, steam, solvent, gas, ammonia, abrasive liquids. Product specification: Temperature: up to 450℃; Size: 4.

Asbestos rope is made of braided asbestos fiber and its section tends to be round, rectangle or square. It is widely used in centrifugal pumps, compressors, vacuum pumps, mixers and ship propeller shaft seals, piston pumps and so on. It has a good thermal conductivity, acid and alkali resistance. Compared with other sealing materials, asbestos rope can be molded into any shape and operates well at extreme temperatures.

Asbestos cement pipes are made of high-grade cement reinforced by 10% -15% chrysotile. They are still in great grade in construction, electric cable pipes, and industries, for their good properties of long life span, low thermal conductivity, durability, high heat and acid resistance, ease of installation as well as affordability.

Asbestos cement sheet is weatherproof, durable, corrosion-resist, heat insulating. All these properties contribute it an ideal construction material. Three types of asbestos cement products at stock - flat sheet, corrugated sheet and coated corrugated sheet. Flat sheet Asbestos cement sheets, 1750×1110mm, 8.

Power steering hoses, either high pressure or low pressure, should be attached to a fitting through hose clamps. On one hand, hose clamps are equipped to prevent leakage of the working fluid. On the other hand, a hose clamp is to supply mechanical attachment. Power steering hose clamp is available in stainless steel 201/301, which has a good resistance to heat, corrosive media and abrasive wear.

CSM power steering hose is applied to the pressure side of power steering systems, for its maximum operating pressure reach 1500 psi. CSM tube gives this power steering hose first-class resistance to elevated temperatures, ozone, aging, oil and solvents. CM (CPE) cover is highly resistant to ozone, oils, heat and other adverse factors.

Power steering return hose is used in the return side of automotive power steering systems. Its tube and cover are made of CR, which has a good resistance to ozone, sunlight, heat, oils and aging. The reinforcement uses 2-spiral synthetic rubber providing protection from the outer environment. This construction gives it ability to work at -40℉ to 250℉under working pressure of 250 psi.

High pressure power steering hose is especially suitable for oils, solvents, lubricate oils and other liquids, for it is lined by Teflon. This material is often used as inner liner for its low coefficient of friction, dielectric properties, high melting temperatures and chemical inertness. Its cover is made of CSM which excels in resisting ozone, heat and oils.

Type 470 Recessed filtration plates are the most efficient and cost effective means of liquid solid separation for solution filtration or sludge dewatering..

Type 800 Programmed Automatic shutter PP high pressure membrane filter press.

Type 470 Airtight Filtration Plate is one type of Airtight Filtration Plate for filter press. They are used in chemical industry. Airtight filtration plate filtration cloth inlaid..

Type 800 Membrane Filtration Plate as filtration plate series is used for filter press. We are the filter press supplier and manufacturer, exporting different membrane filtration plate..

Filtration area(m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) ( mm) overall dimensions unit weight (kg) Production capacity T/h length width height 15 20 Recessed Plate 720×720 25 0.18 0.3－1.0 2170 3030 960 1060 2060 2.

Filtration area(m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) (mm) overall dimensions unit weight (kg) Production capacity T/h length width height 50 32 Membrane plate 1000×1000 Recessed plate 1000×1000 Frame plate thickness 1000×1000 35 0.

Filtration area(m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) ( mm) overall dimensions unit weight (kg) Production capacity T/h length width height 4 11 Recessed plate 500×500 25 0.050 0.5－1.0 1260 1930 700 800 850 6 16 0.

Filtration area (m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) (mm) overall dimensions unit weight (kg) Production capacity T/h length width height 20 20 Membrane plate 800×800 Recessed plate 800×800 30 0.

Filtration area (m2) Chambers No. Plate size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) overall dimensions ( mm) unit weight (kg) Production capacity T/h length width height 100 26 Membrane plate 1500×1500 Recessed plate 1500×1500 45 2.

TW hose fittings or couplings used for tanker TW hose fittings or couplings are also known as tanker hose fittings or tank wagon couplings. As the name meaning we can see that they are widely used for loading and unloading oils, chemicals products in European tanker fleets. This kind of hose fitting is manufactured to the standard of DIN 28450 or DIN EN 14420-6 with safety clamps and pins.

Cam and groove couplings for liquid transportation Cam and groove couplings on a black background Cam and groove couplings Cam and groove coupling is also called Cam lock fitting. It is an easy to use quick release coupling and the easiest and most widely used hose fittings in the markets. It has the features of low cost, easy installation and interchangeable as well as convenient to get from stocks.

Dry break couplings offer efficient method to minimize spills Dry disconnect coupling also called dry break coupling or dry break coupler, is a unique hose connection device providing an automatic mechanism to seal off both the hose and the fixed pipe end when the hose is disconnected. Dry Disconnect Couplings are optimized for safe handling of liquid and vapor with minimum spill during connection and disconnection.

Quality ferrule hose fittings in hydraulic systems We not only can supply hygienic hose fittings but also ferrule fittings of high quality and a wide assortment to customers. The products are manufactured to the international standard. The materials can be brass and stainless steel. These find applications in industry fields such as process control, equipment instrumentation, hydraulic and pneumatic equipment, chemicals and petrochemicals, and automobile and other process industries.

Hygienic hose fittings for food and pharmaceutical industries For food, dairy, beverage, cosmetic and pharmaceutical industries it is important to have the food or hygienic hoses and fittings for cleaning and sterilizing. We are delighted to give you the best solutions for connecting the hoses. Our hygienic hose fittings are the featured products that can solve the problems according to the requirements of customers.

Guillemin couplings without locking and claws for tanker Guillemin couplings are manufactured to a French standard so it is often called French type couplings. It is suitable for transferring and conveying power and granule on tanker fleets. Also this kind of Guillemin coupling has an identical locking head, that is to say there is no difference between the male and the female half.

It is important to choose quality steam hose fittings as the steam is dangerous to handle. Our steam hose fittings are manufactured to the international standard so customers can trust us. In the following we will give your details of every part of the steam hose fittings. Technical data: Steam hose fittings female part and male part are similar.

Loose flange and fixed flange of flanged hose fittings Flanged hose fitting of medium carbon steel SAE flange hose fittingFlanged hose fittings are fittings that have flange fixed on. We can know the product consists of a fitting and a flange. The material of the fitting is often SS 304 or SS 316.

Galvanized brad nails, with length ranging from 10mm to 64mm, are essentially diminutive finishing nails with thin heads. According to steel gauge, the nails can be divided into ST, DN, FN, T and F series. Meanwhile the bard nails are often glued together in strips for an convenient transportation and using.

Galvanized finishing nails, lighter and thinner than common nails, features its small barrel-shaped head just a trifle bigger than the nail shaft. The head dimple on the top allows finishing nails to be driven flush with the wood surface or countersunk and concealed by putty. As the name implies, the finishing nails are intended for finish work where you do not want the nail head to show, such as large crown, wainscoting, millwork, furniture, paneling installation, cabinet work, craft making and baseboard trim, etc.

Galvanized casing nails are similar to finishing nails but more robust and heavier with conical heads and thicker shanks for providing more holding powers. The heads of casing nails allow the nails to be set flush with or just underneath the wood surface, as well as covered with putty or wood filler to make the nail unseen.

Galvanized screw nails, also known as spiral shank nails are popular due to their strong bonding powder. They have helical shanks, resembling screws, and sharp point making penetrating easier just by turning and twisting the nail. Meanwhile, screw nails are slightly easier to be pulled out comparing to ring shank nails.

Reinforced by two braids of high-tensile steel wire, SAE 100R16 high pressure compact hydraulic hose shares similar specifications of SAE 100R2 except tighter bending radius. Black nitrile tube will not react with water- or petroleum-based hydraulic fluid. Neoprene cover is resistant to abrasion, weather degradation and chemicals.