Buy and Sell Bundaberg ads Bundaberg, Buy and Sell classifieds Bundaberg, Buy and Sell free ads Bundaberg, ads for sale Bundaberg, ads to buy Bundaberg, FREEADSAustralia Page number 7-1

Type 470 Airtight Filtration Plate is one type of Airtight Filtration Plate for filter press. They are used in chemical industry. Airtight filtration plate filtration cloth inlaid..

Type 800 Membrane Filtration Plate as filtration plate series is used for filter press. We are the filter press supplier and manufacturer, exporting different membrane filtration plate..

Filtration area(m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) ( mm) overall dimensions unit weight (kg) Production capacity T/h length width height 15 20 Recessed Plate 720×720 25 0.18 0.3－1.0 2170 3030 960 1060 2060 2.

Filtration area(m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) (mm) overall dimensions unit weight (kg) Production capacity T/h length width height 50 32 Membrane plate 1000×1000 Recessed plate 1000×1000 Frame plate thickness 1000×1000 35 0.

Filtration area(m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) ( mm) overall dimensions unit weight (kg) Production capacity T/h length width height 4 11 Recessed plate 500×500 25 0.050 0.5－1.0 1260 1930 700 800 850 6 16 0.

Filtration area (m2) Chambers No. size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) (mm) overall dimensions unit weight (kg) Production capacity T/h length width height 20 20 Membrane plate 800×800 Recessed plate 800×800 30 0.

Filtration area (m2) Chambers No. Plate size (mm) cake thickness (mm) chamber volume (m3) Filtration pressure MPa L1 Anchor hole dimension (mm) overall dimensions ( mm) unit weight (kg) Production capacity T/h length width height 100 26 Membrane plate 1500×1500 Recessed plate 1500×1500 45 2.

TW hose fittings or couplings used for tanker TW hose fittings or couplings are also known as tanker hose fittings or tank wagon couplings. As the name meaning we can see that they are widely used for loading and unloading oils, chemicals products in European tanker fleets. This kind of hose fitting is manufactured to the standard of DIN 28450 or DIN EN 14420-6 with safety clamps and pins.

Cam and groove couplings for liquid transportation Cam and groove couplings on a black background Cam and groove couplings Cam and groove coupling is also called Cam lock fitting. It is an easy to use quick release coupling and the easiest and most widely used hose fittings in the markets. It has the features of low cost, easy installation and interchangeable as well as convenient to get from stocks.

Dry break couplings offer efficient method to minimize spills Dry disconnect coupling also called dry break coupling or dry break coupler, is a unique hose connection device providing an automatic mechanism to seal off both the hose and the fixed pipe end when the hose is disconnected. Dry Disconnect Couplings are optimized for safe handling of liquid and vapor with minimum spill during connection and disconnection.

Quality ferrule hose fittings in hydraulic systems We not only can supply hygienic hose fittings but also ferrule fittings of high quality and a wide assortment to customers. The products are manufactured to the international standard. The materials can be brass and stainless steel. These find applications in industry fields such as process control, equipment instrumentation, hydraulic and pneumatic equipment, chemicals and petrochemicals, and automobile and other process industries.

Hygienic hose fittings for food and pharmaceutical industries For food, dairy, beverage, cosmetic and pharmaceutical industries it is important to have the food or hygienic hoses and fittings for cleaning and sterilizing. We are delighted to give you the best solutions for connecting the hoses. Our hygienic hose fittings are the featured products that can solve the problems according to the requirements of customers.

Guillemin couplings without locking and claws for tanker Guillemin couplings are manufactured to a French standard so it is often called French type couplings. It is suitable for transferring and conveying power and granule on tanker fleets. Also this kind of Guillemin coupling has an identical locking head, that is to say there is no difference between the male and the female half.

It is important to choose quality steam hose fittings as the steam is dangerous to handle. Our steam hose fittings are manufactured to the international standard so customers can trust us. In the following we will give your details of every part of the steam hose fittings. Technical data: Steam hose fittings female part and male part are similar.

Loose flange and fixed flange of flanged hose fittings Flanged hose fitting of medium carbon steel SAE flange hose fittingFlanged hose fittings are fittings that have flange fixed on. We can know the product consists of a fitting and a flange. The material of the fitting is often SS 304 or SS 316.

Galvanized brad nails, with length ranging from 10mm to 64mm, are essentially diminutive finishing nails with thin heads. According to steel gauge, the nails can be divided into ST, DN, FN, T and F series. Meanwhile the bard nails are often glued together in strips for an convenient transportation and using.

Galvanized finishing nails, lighter and thinner than common nails, features its small barrel-shaped head just a trifle bigger than the nail shaft. The head dimple on the top allows finishing nails to be driven flush with the wood surface or countersunk and concealed by putty. As the name implies, the finishing nails are intended for finish work where you do not want the nail head to show, such as large crown, wainscoting, millwork, furniture, paneling installation, cabinet work, craft making and baseboard trim, etc.

Galvanized casing nails are similar to finishing nails but more robust and heavier with conical heads and thicker shanks for providing more holding powers. The heads of casing nails allow the nails to be set flush with or just underneath the wood surface, as well as covered with putty or wood filler to make the nail unseen.

Galvanized screw nails, also known as spiral shank nails are popular due to their strong bonding powder. They have helical shanks, resembling screws, and sharp point making penetrating easier just by turning and twisting the nail. Meanwhile, screw nails are slightly easier to be pulled out comparing to ring shank nails.

Reinforced by two braids of high-tensile steel wire, SAE 100R16 high pressure compact hydraulic hose shares similar specifications of SAE 100R2 except tighter bending radius. Black nitrile tube will not react with water- or petroleum-based hydraulic fluid. Neoprene cover is resistant to abrasion, weather degradation and chemicals.

Medium pressure SAE 100R7 nonconductive thermoplastic hose is available for applications where is potential to contact with high voltage sources. Nylon tube is compatible with petroleum, water and synthetic based hydraulic fluids for mobile equipment, lube lines, blowout preventers and hydraulic lifts where nonconductive character is necessary.

Similar to EN 856 4SH hydraulic hose, EN 856 4SP hose has higher working pressure under the same working temperature. Four layers of high tensile spiral wire give the hose best abrasion resistance and impulse fatigue. This kind of reinforcement is ideal for outdoor applications like forestry and mine equipment.

SAE 100R13 hydraulic hoses are reinforced with four layers of spiraled wire in alternation directions to provide extremely high working pressure. Spiral reinforcement is particularly ideal for high pressure impulse applications as a result of individual wires are parallel. In addition, thin rubber adhesion separates the neighboring spiral wires to avoid cutting one another.

Reinforced by one high tensile wire braid, EN 857 1SC hydraulic hose has similar performance as its counterpart SAE 100R1 besides tighter bending radii. Ozone and weather resistant cover separate the tube from the outside environment and effectively extend the service life of hose. Single wire braided 1SC high pressure hydraulic hose is suitable for high pressure conditions where tight routing is required.

EN 853 2ST/SN hydraulic hose is reinforced by two braids of high tensile steel wire to support high working pressures - up to 6020 psi at 3/16" I.D. Oil resistant tube and ozone and abrasion resistant cover contribute long-terms service life. It is available to convey water- and petroleum-based hydraulic fluids within -40 to 100°C (max 120°C intermittent).

SAE 100R3 medium pressure hydraulic hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. Two plies of braided textile protect the inner tube in case that the outside cover is broken. Nitrile tube has premium oil resistant and won't react with petroleum- or water-based hydraulic fluids within -40°C to 100°C.

SAE 100R1AT single steel wire braided hose is a typical medium pressure hydraulic hose and strongly recommended for hydraulic lines or general industrial system. High tensile strength steel wire reinforcement makes SAE 100R1 hose support higher pressure than common steel wire does. Apart from standard SAE 100R1 hose, high temp and high abrasion hydraulic hoses are supplied.

EN 854 1TE single textile braid hydraulic hose has excellent performance in low pressure lines, return and drain lines. Environment resistant synthetic rubber covers the tube to keep it away from chemicals, ozone and other adverse factors. Oil resistant nitrile tube is compatible with petroleum based hydraulic fluids with -40 to 212°F.

SAE 100R4 wire inserted low pressure hydraulic hose is frequently applied to suction & return line, anti-static delivery line, and vacuum applications for petroleum- and water-based hydraulic fluids. With superior abrasion and weather resistance, neoprene cover serves as guard to avoid hydraulic fluid leakage and protecting the inner tube.

According to the latest surveys, most perforated sheets are produced with round holes. Why? Round roles are manufactured relatively easier with aesthetic effects. The circular die for punching sheet can last longer and easy to be manufactured which makes the round hole perforated sheet cheaper than any other perforated sheet with other hole patterns.